Komentáře a diskuze

  • Honza 22. 3. 2023 v 23:47 k KomentujemeNezlobte se, s vámi debatu končím. Vy si jedete pořád to své dokola. Absolutně nepobíráte principy, které se snažím sdělit...
  • Hori97 22. 3. 2023 v 23:05 k KomentujemeTým Fresh rádia se po úspěšném odladění zvukové techniky přesunul k technice obrazové. Celé studio je vybaveno několika kamerami, které...
  • Jirkas 22. 3. 2023 v 22:32 k Komentujeme"Tato kombinace přestala být vnímána jako trvale udržitelná a žádoucí k tomu, aby dopravní platforma fungovala na vlnách FM." Jasné sdělení,...
  • Jan 22. 3. 2023 v 20:54 k KomentujemeOsobně neznám nikoho z lidí, co to po Radimu Pařizkovi přebrali. Ale je dost možné, že si to vyhodnotili, že...
  • PVo 22. 3. 2023 v 19:58 k KomentujemeMB a Active za dobu svého působení mají na zkřivení radiového trhu hlavní podíl =tedy se projevují jako čiré zlo...
  • PVo 22. 3. 2023 v 19:43 k KomentujemeDokazovat si na hendikepovaném Davidovi že ti zmínění manageři MB jsou lidi na svým místě je myslím docela chucpe, To...
  • Lukáš 22. 3. 2023 v 18:47 k KomentujemeNení vhodná doba je otázka jak výdělečné je toto radio a za druhé Nikola má příjmení cherenčikova Pařizkova. Pařizkovy děti...
  • Honza 22. 3. 2023 v 18:36 k Komentujeme"Ale zkuste přijmout i druhou stranu mince, že prostě milují rádio, snaží se dělat ho nejlíp v podmínkách, které mají,...

Články

2023 Hyundai Kia Engineering Mode, Dealer Mode, Engineer Mode, hidden Android menu and secret features of radio and navigation

How to show the secret menu Engineering Mode and Dealer Mode of Hyundai & Kia & Genesis infotainment system – i30, Tucson, Ioniq, Kona, Ceed, Optima, Sportage, Niro, Stonic, Bayon, Seltos, Carens, Sorento, EV6 etc. – DAB/FM AM radio

Hyundai Kia DAB Engineering Mode
Hyundai Kia DAB Engineering Mode

PROCEDURE MAY VARY FROM CAR TO CAR, NOT WORKING ON ALL SYSTEMS. DO NOT CHANGE ANY HIDDEN SETTING, DO NOT USE IT WHILE DRIVING. USE IT CAREFULLY AT YOUR OWN RISK AND COST!

Engineering Mode (CTS Test, ADB Connect Type, Android Setting, All Applications)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose Screensaver
  3. Tap below Digital – Analogue – None options from left to right and back 7 times in total (tap below Digital, Analogue, None, Analogue, Digital, Analogue, None)
  4. Password is the current time or 2400
  5. Choose Send

Engineering Mode (System, Navigation, Reception, …)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info
  3. Tap 4 times on „Firmware“ or „Map“ and tap once on its version on the same line
  4. Password is 1111 or 2998
  5. Choose Send
  6. Choose Reception -> RDS -> RDS State (TestMode); choose DAB -> DAB State (DAB Engineering Mode)
  • OR
  1. Press the Setup button or choose All menus -> Settings
  2. Choose Screensaver
  3. Tap below Digital – Analogue – None options from left to right and back 7 times in total (tap below Digital, Analogue, None, Analogue, Digital, Analogue, None)
  4. Password is the current time or 2400
  5. Choose Send
  6. Choose All Applications
  7. Choose 3rd Engineering Mode from the top (not the first Engineering Mode, not the DAB Engineering Mode)
  • OR
  1. Press the Setup button or Choose All menus -> Settings
  2. Choose System Info
  3. Press the left knob (volume) to turn off the AV
  4. In the dark part of the screen tap 4 times in the right bottom and once in the left bottom
  • OR
  1. Press the Setup button or choose All menus -> Settings
  2. Choose System info to see last 6 digits of the Software version (e.g. 211027)
  3. Choose Update
  4. Imagine the dark part of the screen is a phone dial with buttons 1 to 9 and the button 0 is in the left bottom of the whole screen
  5. On the imaginary dial enter last 6 digits of the Software version (e.g. 211027)
  6. Password is the current time + last 4 digits of the Software version (e.g. current time is 15:48 -> enter 15481027)
  7. Choose Send

Engineering Mode (All in One Version, …)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info OR General
  3. Tap 5 times left from the Update button and tap once right from the Update button or choose Storage and in the dark part of the screen tap 5 times in the left bottom and once in the right bottom
  4. Password is 2900 or 2400 or 2702 or 2801 or 2603 or 2504 or 2405 or 2306 or 2207 or 2108 or 2009 or 2014
  5. Choose OK
  6. Choose Module Info
  7. Choose FM -> Launch FM Engineering Mode; choose AM -> Launch AM Engineering Mode; choose DAB -> Launch DAB Engineering Mode
  • OR

  1. Choose Radio -> FM
  2. Set the volume to 2
  3. Press the Setup button or choose All menus -> Settings
  4. Choose General
  5. Tap 5 times left from the Update button and tap once right from the Update button
  6. Password is 2900 or 2400 or 2702 or 2801 or 2603 or 2504 or 2405 or 2306 or 2207 or 2108 or 2009 or 2014
  7. Choose OK
  8. Choose OK
  9. Choose Module Info
  10. Choose FM -> Launch FM Engineering Mode; choose AM -> Launch AM Engineering Mode; choose DAB -> Launch DAB Engineering Mode

Engineer Mode (Full Engineering Mode) – 2 knobs

  1. Choose Radio
  2. In a quick sequence set the volume using left knob to level 0, then to level 7 and press the right knob, then set the volume to level 3 and press the right knob, then set the volume to level 1 and press the right knob
  3. Password is 0428 or 0652 or 500625 or 19500624 or 27021427 or 26031236
  4. Choose Dynamics -> Radio

Engineer Mode (Full Engineering Mode) – 1 knob

  1. Set the volume to 0
  2. Press and hold the Star button
  3. Choose VOL knob -> Browse media, map zoom in/out
  4. Choose Home
  5. On the steering wheel set the volume to level 7 and press the Volume knob, then set the volume to level 3 and press the Volume knob, then set the volume to level 1 and press the Volume knob
  6. Password is 0652

EngineerMode (System, Diagnostics, Location, Radio, Voice Recognition)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose General -> System info -> Memory
  3. In the dark part of the screen perform 6 taps in a quick sequence: Tap once below „Available…“ and the orange/grey line, tap 2 times below „Used for…“ and the orange/grey line, tap once above the orange/grey line between „Used for…“ and „Available…“, tap once below the middle of the orange/grey line and tap once below „Available…“ and the orange/grey line
  4. Password is 1032580 + minutes of current time (e.g. current time is 15:48 -> input 103258048)
  5. Choose OK

Dealer Mode (Diagnostics, Location, Media, Radio, Smart Pure Air Version Info/Update)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info
  3. In a quick sequence set the volume using left knob to level 0, then to level 7 and press the right knob, then set the volume to level 3 and press the right knob, then set the volume to level 1 and press the right knob
  4. Password is 2400
  5. Choose Send
  • OR
  1. Press the Setup button or choose All menus -> Settings
  2. Choose General -> System info -> Version info/Update
  3. In a quick sequence set the volume to level 7 and tap on the word „Update“ in the title Version info/Update, then set the volume to level 3 and tap on the word „Update“ in the title Version info/Update, then set the volume to level 1 and tap on the word „Update“ in the title Version info/Update
  4. Password is 2400
  5. Choose OK

DAB 1 – Overview (Freq, …)

  1. Go to the Radio mode
  2. Tap 5 times in the top right corner, under the Back icon

Dumpfile

  1. Press and hold Radio button for 15 seconds

Testmode on older systems – GEN 1.x, GEN 2.0

  1. Go to the Radio mode
  2. Press and hold the Setup button until a screen with device information appears
  3. Touch and hold the screen in the middle until „Testmode“ screen appears
  4. Choose OK
  5. Password is 123456
  6. Choose OK

WATCH RELATED VIDEOS:

PROCEDURE MAY VARY FROM CAR TO CAR, NOT WORKING ON ALL SYSTEMS. DO NOT CHANGE ANY HIDDEN SETTING, DO NOT USE IT WHILE DRIVING. USE IT CAREFULLY AT YOUR OWN RISK AND COST!

Image: emgmotorgroup.com

O čem píšete?
54 Komentáře
Inline Feedbacks
View all comments
Mike SBach
13. 3. 2021 16:48

I have a 2020 Sonata Limited with 10.25 touchscreen. I used to be able to enter Engineer Mode by pressing 5 time left of Update button and once to the right. After November software update, it seems they have changed this. I can no longer get in this way. I have tried all methods above where possible.

TÉMA
2020 Sonata
Mariusz
27. 2. 2021 14:52

Kia Sportage 4 navi JBL.
wersja oprogramowania:QL_17MY.EUR.SOP.9008.1.191209
Moje Enginerin Mode jest krotkie tylko 3 punkty ;
Navigation
Screen Capture
Log
Nie moge dodac plikow z pendriv. Jak dodac przegladarke google, Youtube, inne programy? Jak to zdobic? Prosze o pomoc. Dziekuje za podpowiedzi.
Pozdrawiam

TÉMA
Kia Sportage IV navi 191209
Last edited 2 let před by Mariusz
Mariusz
Reply to  Mariusz
27. 2. 2021 15:29

Nie moge wejsc do Engineering Mode gdzie jest Android Setting i All Applications. Prosze o wskazowki

TÉMA
Navi Kia Sportage 2017, 191209
Christian
15. 1. 2021 18:33

I drive a Hyundai i30n Performance myself. and can’t get into this function, maybe someone has the right password for it

Engineering mode (all in one version, …) Press the Setup button or select All

I would have to have the correct password because I have to install an app

preferably the latest from this year. January 15, 2021

Christian
15. 1. 2021 10:12

i drive a hunday i30n performance myself. and can’t get into this function, maybe someone has the right password for it

Engineering mode (everything in one version, …)
Press the Setup button or select All

Adam
11. 1. 2021 14:29

Hi Folks, 2021 Kia Sportage USA.
I was able to get to dealer mode with the pass code 2400 using the Engineering code acces:
Engineer Mode (Full Engineering Mode)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info
  3. In a quick sequence set volume using left knob to level 0, then to level 7 and press the right knob, then set volume to level 3 and press the right knob, then set volume to level 1 and press the right knob
  4. Password is 0428
  5. Choose Dynamics -> Radio

Anyone done anything on a 2021 Sportage EX?

gsi83
13. 11. 2020 12:45

hello everyone I am desperately looking for a way to get into the engineer mode of the infotainment of the SSANGYONG REXTON Y400 2018 but it is impossible to find on the internet after months of searching I found tutorials for all brands of cars but impossible to find for SSANGYONG.

TÉMA
SSangyong REXTON 2018
Nischay
24. 7. 2020 05:35

Hi Ovi
I have a kia seltos 2020 HTK+ ( 8 inch display)
With its software version showing 200218
Could you please tell me how do I access the engineering mode for this

Alex
18. 6. 2020 00:57

On my 2018 Elantra
i was able to get to engineering mode under system storage .But no Android settings there .
But under the screensaver i don’t know how many times I tried it does not work
I can’t find other engineering mode

TÉMA
2018 Elantra hidden mode
HyundaiElantra
Reply to  Alex
24. 6. 2020 13:33

Yeah I would like to know that also

Edmund
13. 6. 2020 19:04

I’ve tried the Engineering Mode (CTS Test, ADB Connect Type, Android Setting, All Applications), but at the third step, i found only two type of screensaver (analogue and none) on my sonata 2015 Dimension infotainement. So i can i reach the other steps ? Thank

zvi
23. 5. 2020 08:57

i have this software version (see the link ) and i tried to enter into engineering mode without success, i wonder if there is option how to enter on my system
https://www.youtube.com/watch?v=a8GupbrPIgQ
thanks

TÉMA
kia niro 2020 how to enter engineering mode
piho
22. 5. 2020 17:14

Thanks for this. I am having problem getting in to engineering mode on my Kia CEED 2019, SW CD.EUR.SOP.007.1.191209.STD_M. I cannot get to ALL APPLICATIONS.
Only thing working for me is imaginary phone dial, but there there is no ALL APPLICATIONS option.

Jeka
17. 5. 2020 23:12

Hi,
Does it work on 2020 models, e.g. Niro hybrid? Thanks.

Mariusz
Reply to  Oviradio.cz
10. 9. 2020 18:51

For now I was able to enter Dealer Mode in Kia XCeed with 10.25″ screen, software version CD_20.EUR.S5W_L.001.001.200128, using this method:

1. Press Setup> General> System info> Version info
2. Turn the volume to 0
3. Turn the volume up to 7 and confirm with the right tuner knob
4. Turn the volume down to 3 and confirm with the right tuner knob
5. Turn the volume down to 1 and confirm with the right tuner knob

Password 2400

Still looking for Engineering Mode hack.

Last edited 2 let před by Mariusz
Larry
13. 5. 2020 14:14

For Kia Sportage 2019 Gen5 iAVN 8″ and last firmware, what is the way to access Engineering Menu? Thank you!

Max
3. 5. 2020 18:36

Hi, this is not working on system 5.0 MOBIS

ranaz
30. 4. 2020 06:31

Hi.
How Install apk In Gen 4.0?